Show Qos Shared-Policer - Cisco Nexus 7000 Series Command Reference Manual

Cisco Nexus 7000 Series NX-OS Quality of Service Commands
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m .

show qos shared-policer

To display qos shared policers, use the show qos shared-policer command.
Syntax Description
type qos
policer-name
Defaults None
Command Modes Any command mode
Supported User Roles
network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
4.0
Usage Guidelines This command does not require a license.
Examples This example shows how to display all type qos policers:
switch(config)# show qos shared-policer
switch(config)# qos shared-policer foo cir 300 mbps bc 200 ms conform transmit violate
drop
Related Commands Command
class-map
OL-23378-01
show qos shared policer [type qos] [policer-name]
(Optional) Specifies the type qos policers.
(Optional) Specified policer name.
Modification
This command was introduced.
Description
Creates or modifies a class map.
Cisco Nexus 7000 Series NX-OS Quality of Service Command Reference, Release 5.x
show qos shared-policer
QOS-111