Jacuzzi J-315 Installation Manual And Use & Maintenance page 31

5 seconds to adjust with the VOLUME Up or Down buttons from
"Distant" (a broader range of signals) to "Local" (only strong lo-
cal stations). This feature is used to designate the strength of
the signals at which the radio will stop during automatic tuning.
Area: "USA" is the default setting. User now has 5 seconds to se-
lect "USA, "LATIN", "EUROPE" or "ORIT" by pressing the VOLUME
Up or Down buttons. ("LATIN" and "ORIT" are not used).
Interamp On/Off: Feature is not used.
Programmable Turn-on Volume: "VOL PGM 12" is the de-
fault setting. User now has 5 seconds use the VOLUME Up or
Down buttons to program the turn on volume.
Beep Tone: "ON" is the default setting. User now has 5 seconds
to adjust by pressing the VOLUME Up or Down buttons from
"ON" to "Off".
6. Audio/Enter Button: Press Audio/Enter to navigate th-
rough the stereo sound functions. Short press "AUDIO" button
to access the audio menu. User can navigate thru the audio me-
nu items by pressing the "AUDIO" button repeatedly, or by pres-
sing the Tuning Up or Tuning Down Button
sired menu item appears on the display, adjust that option by u-
sing the Volume Up (7) or Down button (8) within 5 seconds.
NOTA: The unit will automatically exit the Audio Menu after fi-
ve seconds of inactivity.
VOLUME (Volume Level): User has 5 seconds to use the Vo-
lume button to adjust the desire volume level, the volume level
will be shown on the LCD display ranging from 00 (lowest) to
46 (highest).
SUBWOOFER (Sub-woofer Level): User has 5 seconds to use
the Volume Up or Down button to adjust the Sub-woofer lever from
"00" to "12".
SUB-W LPF (Sub-woofer Low Pass Filter): User has 5 se-
conds to use the Volume Up or Down button to select the 4 dif-
ferent Low Pass filters Flat, 80Hz, 120Hz or 160Hz.
NOTA: The Sub-woofer level control is only applicable if the
unit is equipped with the optional subwoofer line out, and only
if the unit is connected to an optional sub-woofer speaker.
The Sub-woofer level control option will only appear in the Au-
dio Menu if the "Sub-woofer" function is activated "ON" by
pressing the "Sub-W" button on control panel.
iX-BASS (iX-Bass Level): User has 5 seconds to use the Vo-
lume Up or Down button to select the 3 different Bass Boost le-
vel: Low, Mid, or High.
BASS (Bass Level): User has 5 seconds to use the Volume Up
or Down button to adjust the desired Bass level range from -6
to +6.
BASS -CFQ (Bass Center Frequency): User has 5 seconds
to use the Volume Up or Down button to adjust the desired Bass
Center Frequency to 60Hz, 80Hz, 100Hz, or 200Hz.
BASS-Q: (Bass Quality Factor): User has 5 seconds to use
the Volume Up or Down button to adjust the desired Bass Qua-
lity Factor to 2N, 1N, 1W or 2W.
MIDDLE (Middle Level): User has 5 seconds to use the Vo-
lume Up or Down button to adjust the desired Middle level ran-
ge from -6 to +6.
MID-CFQ (Middle Center Frequency): User has 5 seconds
to use the Volume Up or Down button to adjust the desired
Middle Range Center Frequency to 500Hz, 1KHz, 1.5KHz, or
2.5KHz.
MIDDLE-Q (Middle Quality Factor): User has 5 seconds to
use the Volume Up or Down button to adjust the desired Midd-
. Once the de- le Quality Factor to 2N, 1N, 1W or 2W.
TREBLE (Treble Level): User has 5 seconds to use the Volu-
me Up or Down button to adjust the desired Treble level range
from -6 to +6.
TRE-CFQ (Treble Center Frequency): User has 5 seconds
to use the Volume Up or Down button to adjust the desired Tre-
ble center frequency to 10KHz, 12.5KHz, 15KHz, or 17.5KHz.
BALANCE: User has 5 seconds to use the Volume Up or Down
button to adjust the Balance between the right and left speakers
from R12 (full right) to L12 (full left). "C00" represents an equal
balance between the right and left speakers.
FADER: User has 5 seconds to use Volume Up or Down but-
ton to adjust the Fader between the front and rear speakers
from R12 (full rear) to F12 (full front). "C00" represents an e-
qual balance between the front and rear speakers.
7. Volume Up Button: Press + (Volume Up) to increase the vo-
lume level. The volume level is shown on the display panel, ran-
ging from 0 to 46.
8. Volume Down Button: Press - (Volume Down) to decrea-
se the volume level. The volume level is shown on the display pa-
nel, ranging from 46 to 0.
9. Mode Button: Short press the Mode button to change input
from XM Tuner (not used), CD, AUX, or Tuner. The mode selec-
tion is shown on the display panel.
10. Band Button: Press Band to change between FM1, FM2, FM3,
AM1, and AM2 bands.
31