Sharp KS-R19S Service Manual page 10

1. Remove the body in accordance with "REMOVE OF BODY".
2. Remove the lid assembly in accordance with "REMOVE OF LID ASSEMBLY".
3. Upside down the outer pot, pry the claw of outer pot by the flat type screwdriver or similar.
4. Fix the upper ring and turn out the outer pot counterclockwise.
5. Remove the outer pot from the upper ring.
6. Now the upper ring is free.
REMOVE OF HOLDER PLATE (LID HEATER ASSEMBLY)
1. Remove the lid assembly in accordance with "REMOVE OF LID ASSEMBLY".
2. Pull the inner lid ass'y from holder plate.
3. Remove the screw holding the lid cover to the lid.
4. Insert 2 pieces of plastic ruler into the gap between the lid and the lid cover, taking care not to damage
the lid. Then remove the lid away from the lid cover. Fig. 12.
5. Separate the lid cover from the lid.
6. Pry the claw of holder plate and turn the holder plate clockwise.
7. Remove the holder plate from lid cover.
8. Now the holder plate is free.
Lid
Lid heater ass'y
Holder plate
REMOVE OF UPPER RING
Outer pot
Fig. 11
Plastic ruler
Lid cover
Claw of outer pot
Screw
Fig. 12
Fig. 13
10
Outer pot
Upper ring
Lid cover
Claw of holder plate