About This Handbook; Warranty Information - Raymarine autopilot control unit Owner's Handbook Manual

Preface

About this handbook

Welcome to the handbook for the ST7001+ autopilot control unit.
This handbook contains two main parts:
Part 1: Using the ST7001+
Chapter 1: Introduction
1
Introduces the autopilot, its features and its use.
Chapter 2: Basic Operation
Covers basic autopilot operation: using Auto mode,
2
adjusting autopilot performance, and changing the control
unit lighting.
Chapter 3: Advanced Operation
3
Explains how to use Track and Wind Vane modes, adjust
rudder gain and display data pages.
Chapter 4: Fault Finding & Maintenance
4
Provides general maintenance procedures and
trouble-shooting information (including alarm messages).
Part 2: Installing the ST7001+
Chapter 5: Installing the ST7001+
5
Explains how to install your ST7001+ control unit and
connect it to your autopilot system.
Chapter 6: Commissioning the Autopilot
6
Covers dockside checks after installation, and the initial
seatrial calibration.
Chapter 7: Adjusting Autopilot Settings
7
Provides details on adjusting the control unit and autopilot
settings in Calibration mode.
At the end of this handbook we have included an appendix, product
specifications, a glossary, an index, installation template, and

warranty information.

Note: This handbook contains important information about
installing, using and maintaining your new Raymarine product. To
get the best from the product, please read this handbook thoroughly.
vii
page 1
page 3
page 17
page 35
page 45
page 55
page 75