Contrast - Raymarine autopilot control unit Owner's Handbook Manual

16

Contrast

To set the contrast level for the ST7001+ display:
1. With the autopilot in Standby mode, press the disp key for one
2. Press the disp key for one second again, to display the CONTRAST
3. Use the up and down arrow keys to set the required contrast level
4. The display automatically returns to the previous mode if you do
ST7001+ Autopilot Control Unit - Owner's Handbook
second to access the LAMP screen.
screen.
(from 1 to 15 ).
not press a key for 10 seconds:
• if you press another mode key within 10 seconds you will
select the mode assigned to that key (for example: auto
selects Auto mode, standby selects Standby mode)