Specifications; Leakage Current Check; Safety Precautions - Denon AVR-2802 Service Manual

SAFETY PRECAUTIONS

The following check should be performed for the continued protection of the customer and service technician.

LEAKAGE CURRENT CHECK

Before returning the unit to the customer, make sure you make either (1) a leakage current check or (2) a line to chassis
resistance check. If the leakage current exceeds 0.5 milliamps, or if the resistance from chassis to either side of the
power cord is less than 460 kohms, the unit is defective.

SPECIFICATIONS

AUDIO SECTION
Power Amplifier
Rated output:
Dynamic power:
Output terminals:
Analog
Input sensitivity/input impedance:
Frequency response:
S/N:
Distortion:
Rated output:
Digital
D/A output:
Digital input:
Phono equalizer (PHONO input      REC OUT)
Input sensitivity:
RIAA deviation:
Signal-to-noise ratio:
Rated output/Maximum output:
Distortion factor:
VIDEO SECTION
Standard video jacks
Input/output level and impedance:
Frequency response:
S-video jacks
Input/output level and impedance:
Frequency response:
Color component video jacks
Input/output level and impedance:
Frequency response:
TUNER SECTION
Receiving Range:
Usable Sensitivity:
50dB Quieting Sensitivity:
S/N (IHF-A):
Total Harmonic Distortion (at 1kHz):
GENERAL
Power supply:
Power consumption:
Maximum external dimensions:
Weight:
REMOTE CONTROL UNIT
Batteries:
External dimensions:
Weight:
* For purposes of improvement, specifications and design are subject to change without notice.
Front: 90W + 90W (8Ω/ohms, 20Hz ~ 20kHz with 0.05% T.H.D.)
135W + 135W (6Ω/ohms, 1kHz with 0.7% T.H.D.)
150W + 150W (6Ω/ohms, EIAJ)
Center: 90W (8Ω/ohms, 20Hz ~ 20kHz with 0.05% T.H.D.)
135W (6Ω/ohms, 1kHz with 0.7% T.H.D.)
150W (6Ω/ohms, EIAJ)
Surround: 90W + 90W (8Ω/ohms, 20Hz ~ 20kHz with 0.05% T.H.D.)
135W + 135W (6Ω/ohms, 1kHz with 0.7% T.H.D.)
150W + 150W (6Ω/ohms, EIAJ)
Surround Back: 90W (8Ω/ohms, 20 Hz ~ 20kHz with 0.05% T.H.D.)
135W (6Ω/ohms, 1kHz with 0.7% T.H.D.)
150W (6Ω/ohms, EIAJ)
120W × 2ch (8Ω/ohms)
170W × 2ch (4Ω/ohms)
200W × 2ch (2Ω/ohms)
Front: A or B 6 ~ 16Ω/ohms
A + B 8 ~ 16Ω/ohms
Center, Surround, Surr.Back: 6 ~ 16Ω/ohms
200mV/47kΩ/kohms
10Hz ~ 100kHz: +0, −3dB (DIRECT mode)
102dB (DIRECT mode)
0.005% (20Hz ~ 20kHz) (DIRECT mode)
1.2V
Rated output  2V (at 0dB playback)
Total harmonic distortion  0.008% (1 kHz, at 0 dB)
S/N ratio  102dB
Dynamic range  96dB
Format  Digital audio interface
2.5mV
±1dB (20Hz to 20kHz)
74dB (A weighting, with 5mV input)
150mV/7V
0.03% (1kHz, 3V)
1Vp-p, 75Ω/ohms
5Hz ~ 10MHz  +0, −3dB
Y (brightness) signal  1Vp-p, 75Ω/ohms
C (color) signal  0.286Vp-p, 75Ω/ohms
5Hz ~ 10MHz  +0, −3dB
Y (brightness) signal  1Vp-p, 75Ω/ohms
(blue) signal  0.7Vp-p, 75Ω/ohms
P /C
B B
(red) signal  0.7Vp-p, 75Ω/ohms
P /C
R R
5Hz ~27MHz  +0, −3dB
[FM] (note: µV at 75Ω/ohms, 0dBf=1 × 10
87.50MHz ~ 107.90MHz
(for U.S.A., Canada and multiple voltage models)
87.50MHz ~ 108.00MHz
(for Europe, Asia, China, Hong Kong, Taiwan R.O.C. and Multiple voltage models)
1.0µV (11.2dBf)
MONO: 1.6µV (15.3dBf)
STEREO: 23µV (38.5dBf)
MONO: 77dB
STEREO: 72dB
MONO: 0.15%
STEREO: 0.3%
AC120V, 60Hz (for U.S.A., Canada and Taiwan R.O.C. models)
AC230V, 50Hz (for Europe model)
AC220V, 50Hz (for China model)
AC115V/230V, 50/60Hz (for Asia, Hong Kong and Multiple voltage models)
5.0A (for U.S.A.& Canada model)
270W (for Europe, Asia, China, Hong Kong and Multiple voltage models)
650W (for Taiwan R.O.C. model)
2.0W Max (Standby)
434 (W) × 171 (H) × 416 (D)mm (17-3/32" × 6-11/32" × 16-3/8")
11.5kg (25 lbs 6 oz)
(RC-903: for U.S.A., Canada, Asia, China, Hong Kong, Taiwan R.O.C. and Multiple voltage models)
(RC-904: for Europe model)
R6P/AA Type (three batteries)
70 (W) × 215 (H) × 24 (D)mm (2-3/4" × 8-15/32" × 15/16")
200g (Approx. 7 oz) (including batteries)
-15 W) [AM]
520kHz ~ 1710kHz
(for U.S.A., Canada and Multiple voltage models)
522kHz ~ 1611kHz
(for Europe, Asia, China, Hong Kong, Taiwan R.O.C. and multiple voltage models)
18µV
AVR-2802/982
2