Midi; Tuning - Johannus Ecclesia T-25 User Manual

Table of Contents

Advertisement

MIDI

MIDI is a protocol for communication between the organ and other devices, such as:
PC
Sequencer
Other musical instruments
Programme MIDI Config
The programmable MIDI stops allow you to control any module voice through any MIDI channel
(1-16).
1.
Press the MENU button.
2.
Use the - and + buttons to select the MIDI on the display.
3.
Press the SET button. The display shows the text Manual: and the text Channel MSB
LSB Voice below this.
4.
Select the MIDI stop to be programmed (for example MIDI III). The display will now
show following Manual: the selected keyboard and the selected settings below the text
Channel MSB LSB Voice. The arrow preceding the number indicates the setting that can
be changed.
5.
Use the - and + buttons to select the desired MIDI channel (Channel).
6.
Press the SET button. The selected setting is saved in the memory and the arrow now
goes to the next setting: MSB.
7.
If necessary, use the - and + buttons to select the required MIDI channel (Channel).
8.
Press the SET button. The selected setting is saved in the memory and the arrow now
goes to the next setting: LSB.
9.
If necessary, use the - and + buttons to select the required LSB value (LSB).
10.
Press the SET button. The selected setting is saved in the memory and the arrow now
goes to the next setting: Voice
11.
Use the - and + buttons to select the required module voice LSB value (LSB).
12.
Select another MIDI stop to be programmed, if required.
13.
Press the MENU button to return to the main menu.
14.
Press the MENU button again to exit the Easy Menu.

Tuning

The Tuning mode shifts the pitch in fourteen steps of 1 Hz (from 426 Hz to 454 Hz). The set pitch
can be read on the display.
Programme Tuning
1.
Press the MENU button.
2.
Use the - and + buttons to select the Tuning on the display.
3.
Press the SET button. The display shows the current tuning setting (Tune: ...Hz).
4.
Use the - and + buttons to select the required pitch.
5.
Press the SET button. The selected settings are stored in the memory and you
automatically return to the main menu.
6.
Press the MENU button to exit the Easy Menu.
JOHANNUS
the
Easy Menu
revolution
Easy Menu - 2 -

Advertisement

Table of Contents
loading

Table of Contents