Midi Config - Johannus Ecclesia Choir User Manual

5.8

MIDI Config

MIDI is a protocol for communication between the organ and other devices, such as PC,
Johannus Sequencer+ or other musical instruments.
The programmable MIDI stops allow you to control any module voice through any MIDI
channel (1-16).
The four parts of the programmable MIDI code are: Channel, Msb, Lsb en Voice.
1. Press the MENU piston
Use the - and + pistons to select the MIDI Config
2.
function on the display.
3. Press the ENTER piston. A question to select a MIDI
stop to configure appears on the display.
4. Activate the MIDI stop which has to be configured
(MIDI from the Swell, for example). The display shows
on the first line: Swell Channel (the selected MIDI
stop and the first part of the MIDI code) and on the
second line the settings of all four parts: Channel, Msb,
Lsb en Voice.
5. Use the - and + pistons to select the desired MIDI-
channel.
Press the ENTER piston. The display shows: Swell
6.
Msb.
7. If needed, use the - and + pistons to select the desired
Msb setting.
Press the ENTER piston. The display shows: Swell
8.
Lsb.
9. If needed, use the - and + pistons to select the desired
Lsb setting.
10. Press the ENTER piston. The display shows: Swell
Voice.
11. Use the - and + pistons to select the desired Voice
setting.
12. Press the ENTER piston. The selected configuration is
now stored in memory. The first of the four parts of the
programmable MIDI code appears on the display.
13. Press the MENU piston 2x to exit the Johannus Menu.
User Manual Ecclesia Choir / Ecclesia T-150
Johannus Menu:
Crescendo
Johannus Menu:
MIDI Config
Select a MIDI
Stop to config
Swell Channel
2 0 0
Swell Channel
2 0 0
Swell Msb
2 0 0
Swell Msb
2 0 0
Swell Lsb
2 0 0
Swell Lsb
2 0 0
Swell Voice
2 0 0
Swell Voice
2 0 0
Swell Channel
2 0 0
Mem: 1 Vol:25
Tr: 0/440 Cr:--
1
1
1
1
1
1
1
1
1
24