Routing Configuration - Nortel SR1001 Installation Manual

Routing Configuration

Router/configure/ interface/bundle Rome> encapsulation fr
Router/configure/ interface/bundle Rome> fr
Router/configure/ interface/bundle Rome/fr> intf_type dce
Router/configure/ interface/bundle Rome/fr> lmi
Router/configure/ interface/bundle Rome/fr/lmi> keepalive 12
Router/configure/ interface/bundle Rome/fr/lmi> exit
Router/configure/ interface/bundle Rome/fr> pvc 16
Router/configure/ interface/bundle Rome/fr/pvc 16> shaping cir 2048000
Router/configure/ interface/bundle Rome/fr/pvc 16> exit
Router/configure/ interface/bundle Rome/fr> enable interface
Router/configure/ interface/bundle Rome/fr> exit 4
Serial and V.35 Bundle Configuration
Router> configure term
Router/configure> module
Router/configure/module> serial 1> v35
Router/configure/module/serial 1/v35>
Nortel products support RIP, OSPF, and BGP4 routing protocols.
RIP
Configuring RIP for Ethernet 0 and WAN 1 interfaces.
Router> configure terminal
Router/configure> router rip
Router/configure/router rip> interface ethernet0
Router/configure/router rip/interface ethernet0> exit
Router/configure/router rip> interface wan1
Router/configure/router rip/interface wan1> exit 3
OSPF
Configuring OSPF between a LAN and a WAN over multiple CT3 links running MLPPP.
Router> configure terminal
Router/configure> interface ethernet 0
Router/configure/interface/ethernet 0> ip address 10.10.10.1 24
Router/configure/interface/ethernet 0> exit 2
Router/configure> interface bundle Dallas
Router/configure/interface/bundle Dallas> link ct3 1 1-10
Router/configure/interface/bundle Dallas> encapsulation ppp
Router/configure/interface/bundle Dallas> ip address 20.20.20.1 24
Router/configure/interface/bundle Dallas> exit 2
Router/configure> router routerid 10.10.10.1
Router/configure> router ospf
Router/configure/router/ospf> area 760
Router/configure/router/ospf/area 760> exit
Router/configure/router/ospf> interface Dallas area_id 760
Router/configure/router/ospf/interface Dallas> cost 10
Router/configure/router/ospf/interface Dallas> exit
Router/configure/router/ospf> interface ethernet0 area_id 760