Fade - Panasonic AG-HMX100P Operating Instructions Manual

Fade

Fade is an effect of gradually erasing images or decreasing
The following diagram shows an example of fade-out.
1
Set the fading method in the [FADE] submenu
of the [DSK FADE] menu ( page Vol.2-11).
2
Set the FADE transition time (from fading start
to end) ( "To set the FADE transition time" on
this page).
3
Press the FADE execution button.
4
Press the FADE execution button again.
The button goes off and fade-in is executed.
To synchronize the audio faders to the
transition lever
To set the FADE transition time
shown in the area where the event number, transition time,
pattern number, and internal video are displayed on the
setting screen (
The factory default setting is [02:00
1
Press the FADE setting button to turn on.
2
Set the FADE transition time by entering a
numeric value with the numeric keys or using
the TIME rotary control.
Example: To set "2:05" (2 seconds 5 frames),
enter "2.5."
be used to select the transition time display form
3
Press the key.
38
F
