Panasonic AG-HMX100P Operating Instructions Manual page 36

For luminance keying, chroma keying or
external keying, apply effects such as slice and
slope to the key video ( page Vol.2-6).
5
Set the pattern position (where the key is
inserted) using the joystick.
position is set to the center.
fixed to the current position.
 NOTE
There are some patterns for which the position
cannot be adjusted with the joystick.
 For more information, refer to "List of Key
Patterns" at the back of Volume 2.
For the patterns registered as direct patterns, the
settings of the effects and position applied to each
pattern are saved in memory and applied when the
pattern is called next time (if [MODE] in the [SETUP]
menu is set to [PRESET]). Any settings made for the
patterns not registered as direct patterns are not
saved in memory.
6
Set the pattern size (key size) using the rotary
Z control.
ASPECT button to turn on, and the aspect ratio
of the pattern can be temporarily changed with
ratio returns to the value before change.
 For patterns to which the aspect change function
7
Set the transition time (from combining start to
end) ( page 35).
8
Slide the transition lever to the B side (or A
side) or press the AUTO TAKE button.
and source video A is combined with B (or source
36
To use the Scene Grabber function
The scene grabber function allows you to move the image
 For patterns to which the Scene Grabber function can
Volume 2.
 NOTE
You cannot use multi-strobe effects ( page Vol.2-15) and
the scene grabber function at the same time. Whichever is
selected later has priority and the other selected earlier is
canceled.
To display the key inverted
Downstream Key (DSK)
effects have already been applied.
To create DSK using material imported
from PC
Input material such as characters created with a single