Message List Technology Messages - Siemens SIWAREX FTC Device Manual

M D
ESSAGES AND IAGNOSIS

7.7 Message List Technology Messages

Error Technology message
No. - Meaning
1-10 MMC error
1 Card function not executable
2 Trace recording aborted since the MMC
is full
3 Recording aborted since the parameters
have been changed
4 logging not possible since the MMC is
full
5 Trace overloaded
11-20 Log output error
11 Error in log
12 Timeout print-out
SIWAREX FTC 7-107
Explanation
MMC defect or non-existent. MMC check
required.
These errors are generated:
 If a trace entry should be made to the MMC,
but no formatted MMC is inserted
 If the MMC is deleted during a logging/trace
entry.
 If the MMC contains data errors that cannot
be restored after insertion.
The trace recording has been aborted because
there is no more memory available. If recording
to the MMC has been defined, insert a new
MMC. Set the recording method to cyclic
memory before formatting an MCC so that the
oldest data is automatically continuously
overwritten.
If recording to RAM is defined, read the data if
desired and then delete the trace memory. Set
the recording method to cyclic memory if you
want to overwrite the oldest data automatically.
Trace recording has been aborted because the
recording device parameters have been
changed during the recording process.
Logging to the MMC cannot be performed
because the memory on the MMC is exhausted.
Use a new MMC.
The defined cycle for the trace recording cannot
be processed. There may be problems with the
MMC. Use a new MMC.
If the problem still occurs, decrease the
recording cycle of the trace function in DR 7 or
record to the RAM memory (MMC parameter in
DR 7).
Logging the used text is not possible because a
non-defined code for a variable field has been
defined. Check the log texts in DR 40, 41, 42 or
43.
A print-job was not completed within the
monitoring time defined for logging in DR 4.
Check the output device or increase the
monitoring time.