I/O Assignment To Technology Objects - Siemens SIMOTION TM15 Commissioning Manual

Configuration/programming

2.4 I/O assignment to technology objects

2.4 I/O assignment to technology objects
Linking Technology Objects with Terminal Modules
Inputs of measuring inputs and outputs of output cams are operated with the associated
technology objects (TOs). A general understanding of the use of technology objects is
therefore needed to perform the desired configurations.
Note
The terminal module must be powered up before it can be accessed by technology objects.
Otherwise, a technology alarm will be triggered.
Inputs of measuring inputs are addressed in the same way as inputs (DI), and outputs of
output cams are addressed in the same way as outputs (DO).
You will find a detailed description of linking technology objects with terminal modules in the
"SIMOTION Motion Control - Technology Objects for Output Cams and Measuring Inputs"
Manual.
See also
Power Up and Synchronization with the User Program (Page 37)
Linking symbolic I/O variables with TM1x terminal modules (Page 32)
36
TM15 / TM17 High Feature Operating Manual
Commissioning Manual, 05/2009