Gts Cir - HP A8800 Series Command Reference Manual

Parameters
dp-name: Drop profile name, a case-sensitive string of 1 to 31 characters.
Description
Use drop-profile to bind a drop profile to a forwarding profile.
Use undo drop-profile to remove the drop profile from the forwarding profile.
By default, a forwarding profile does not reference any drop profile but adopts tail drop.
Examples
# Bind drop profile testdp to forwarding profile testfp.
<Sysname> system-view
[Sysname] qos forwarding-profile testfp
[Sysname-hqos-fp-testfp] drop-profile testdp

gts cir

Syntax
gts cir cir-value [ cbs cbs-value ]
undo gts
View
Forwarding profile view
Default level
2: System level
Parameters
cir cir-value: Specifies the committed information rate (CIR) in kbps, which ranges from 40 to 10000000
in steps of 40.
cbs cbs-value: Specifies the committed burst size (CBS) in bytes, which ranges from 1024 to 133169152
in steps of 1024. The default CBS value (in bytes) is the traffic transmitted at the rate of CIR within 500
ms.
Description
Use gts to configure GTS parameters for a forwarding profile.
Use undo gts to delete the GTS configuration.
By default, no GTS parameters are configured for a forwarding profile, and the traffic rate is not limited.
Examples
# Configure GTS parameters for forwarding profile testfp as follows: set the CIR to 320 kbps and CBS to
2048 bytes.
<Sysname> system-view
[Sysname] qos forwarding-profile testfp
[Sysname-hqos-fp-testfp] gts cir 320 cbs 2048
129