Fr-Class - HP A8800 Series Command Reference Manual

View
System view
Default level
2: System level
Parameters
class-name: FR class name, which is a string of 1 to 30 characters.
Description
Use fr class to create an FR class and enter FR class view.
Use undo fr class to remove the specified FR class.
By default, no FR class is created.
The FR class parameters do not take effect until you associate the FR class with an interface or PVC and
enable the FR QoS function on the interface.
With an FR class removed, all the associations associating this FR class with an interface or a DLCI are
released.
Related commands: fr-class.
Examples
# Create FR class test1, and enter its view.
<Sysname> system-view
[Sysname] fr class test1
[Sysname-fr-class-test1]

fr-class

Syntax
fr-class class-name
undo fr-class class-name
View
FR interface/subinterface view, FR DLCI view
Default level
2: System level
Parameters
class-name: FR class name, which is a string of 1 to 30 characters.
Description
Use fr-class to associate an FR class with the current FR PVC.
Use undo fr-class to cancel the association.
By default, no FR class is associated with an FR interface/subinterface or FR PVC.
If the specified FR class exists, the fr-class command associates the FR class with the current FR PVC. If the
specified FR class does not exist, the system prompts that the FR class does not exist.
116