Heat Pump, Split System, Single Service, 3 phase
7 Annual Maintenance Services
7.1
Hydraulic Circuit
•
clean filter (if any)
•
inspect heating system (system pressure,
purging, leak test)
•
inspect expansion vessel (preload with nitrogen
at 1 bar)
•
fix any leaks
7.2
Outdoor unit
•
clean heat exchanger
•
clean refrigeration and ventilation compartment
•
check for correct condensation drain
•
conduct refrigeration circuit leak test (required if
charged > 2 kg)
Maintenance Document 1394-1
7.3
Electrical
•
Inspect
connections
appropriate
•
Check condition of wires and boards
7.4
Operating checks
•
conduct refrigeration readings at temperatures
•
in case of malfunction, install pressure gauges
for refrigeration diagnosis
•
check voltage, current and control
and
tighten
where
113