Radio Shack TAD-1028 Owner's Manual page 7

43-788.fm Page 7 Monday, August 16, 1999 8:19 AM
Note: Adjust
VOLUME
sition before connecting power.
Illus. of VOLUME
switch.
Caution: The supplied adapter sup-
plies 9 volts AC, delivers at least 440
milliamps, and has a plug which proper-
ly fits the TAD-1028's
jack. Using an adapter that does not
meet these specifications might dam-
age the TAD or the adapter.
On a Desk Top
Follow these steps when you place the
TAD on a desk, shelf, or table.
1. Plug one end of the supplied long
modular cord into the
on the back of the base.
Illus. of TO LINE jack
and end of modular
cord about to be
inserted into jack.
Other connections
are not yet made.
2. Plug the modular cord's other end
into a modular phone line jack.
3. Plug one end of the supplied coiled
handset cord into the jack on the
bottom of the base. Plug the other
end into the handset's jack.
to the middle po-
4. Place the handset in the cradle.
5. Insert the supplied AC adapter's
AC 9V 440mA
6. Route the adapter's cord through
jack
TO LINE
7. Plug the adapter into a standard
Illus. showing
connection of
coiled cord.
barrel plug into the
AC 9V 440mA
jack on the back of the base.
Illus. of AC 9V 440mA
jack. Show barrel
plug about to be
inserted into jack.
Show modular cord
already connected.
the strain relief slot on the base.
Illus. showing cord
routed through the
strain relief slot.
AC outlet.
7