Radio Shack TAD-1028 Owner's Manual page 10

43-788.fm Page 10 Monday, August 16, 1999 8:19 AM
3. Route the cord into the groove on
the phone's base.
Illus. showing routing
of modular cord.
4. Plug one end of the supplied coiled
cord into the jack on the bottom of
the base and route the cord into the
groove beside the jack.
Illus. showing routing
of coiled cord before
it is plugged into the
handset.
5. Insert the supplied AC adapter's
barrel plug into the
jack on the back of the base.
Illus. of AC 9V 440mA
jack. Show barrel
plug about to be
inserted into jack.
Show modular cord
already connected.
6. With the power cord hanging to the
right of the two tabs and the modu-
lar cord hanging straight down from
the groove, align the two screws
with the TAD's keyhole slots and
10
7. Slide the handset clip up and out of
AC 9V 440mA
8. Plug the other end of the coiled
9. Place the handset in the cradle.
10. Plug the modular cord into a modu-
11. Plug the adapter into a standard
slide the TAD downward to secure
it.
Illus. showing
bottom of base,
keyhole slots,
screws.
Also, show power cord
and modular cord
hanging down.
its retaining slot, rotate it 180°, then
slide the clip back into its slot.
Illus. showing
clip being removed
and reinserted.
cord into the handset's jack.
Illus. showing coiled
cord connection to
handset.
lar phone line jack.
AC outlet.