9.20. Disassembly of Main P.C.B.
• Refer to "Disassembly of Top Cabinet".
• Refer to "Disassembly of Rear Panel".
• Refer to "Disassembly of CD Mechanism Unit".
Step 1 Remove 1 screw.
Step 2 Detach 5P Wire at the connector (FP3001) on Main
P.C.B..
Step 3 Detach 10P FFC at the connector (FP3002) on Main
P.C.B..
Step 4 Detach 30P FFC at the connector (CN2004) on Main
P.C.B..
Step 5 Detach 11P Cable at the connector (CN2001) on Main
P.C.B..
Step 6 Detach 10P FFC at the connector (CN2002) on Main
P.C.B..
Step 7 Detach 12P Wire at the connector (CN5001) on Main
P.C.B..
Step 8 Detach 11P Cable at the connector (CN1851) on SMPS
P.C.B..
Step 9 Detach 2P Wire at the connector (CN2006) on Main
P.C.B..
Step 10 Detach 2P Wire at the connector (CN2007) on Main
P.C.B..
Step 11 Detach 12P FFC at the connector (CN3402) on Main
P.C.B..
Step 12 Remove 3 screws.
Step 13 Lift up to remove the Main P.C.B..
Caution: During assembling, ensure that the Main P.C.B. is
properly located & fully seated onto the Bottom Chassis.