Heat & Glo SLR-D Owner's Manual page 68

B. Vent Components Diagrams (continued)
PVI-SLP-B
Power Vent Inline
Note: Wire harnesses required to power the PVI-SLP-B connect to the appliance and are ordered separately from
PVI-SLP-B. Contact your dealer to order.
Note: The PVI-SLP-B requires a PV-IPI-CK be installed on this appliance. The PV-IPI-CK is ordered separately from
the PVI-SLP-B. Contact your dealer to order.
12-1/2 IN.
(318 mm)
Figure 16.5 PVI-SLP-B Vent Components
68
13-5/8 IN.
346 mm
12-1/2 IN.
318 mm
20-3/4 IN.
527 mm
16 IN.
406 mm
9-3/16 IN.
(233 mm)
13-5/8
(346 mm)
SLP-LPC
SLP Low Profile Cap
(Approved for use with PVI-SLP-B only)
Heat & Glo • SLR-D • 2333-900 Rev. F • 9/17
Optional Wire Harness
DESCRIPTION
10 ft. PV Wire Harness
20 ft. PV Wire Harness
40 ft. PV Wire Harness
60 ft. PV Wire Harness
80 ft. PV Wire Harness
100 ft. PV Wire Harness
4-1/2 IN.
114 mm
16-11/16 IN.
424 mm
PART NUMBER
PVI-WH10
PVI-WH20
PVI-WH40
PVI-WH60
PVI-WH80
PVI-WH100
15 IN.
(381 mm)
16-11/16 IN.
(424 mm)