Outputting Measurement Data - JUKI IT-20 Instruction Manual

(4) Outputting measurement data

In transmission data indication under normal mode, it is possible to indicate 30 different data
depending on the No. switch input combination and check the Ip address in a similar fashion to
other Id data indication.
The sewing machine Id can be checked by No. 29 (switches
and the Ip address by No. 30 (switches
e.g. for Ip address 192.168.1.106,
1st block
1
2
After 1.5 seconds
2nd block
Clock indication
When switch
1
longer under normal mode, USB data writing function
is enabled. When
second or longer, network data transmission function is
enabled.
"Wait" blinks on the 7-segment indication block during
data output.
+ ).
After 1.5 seconds
After 3 seconds
– 7 –
is pressed for one second or
switch is pressed for one
2
+ ) for transmission data,
3rd block
After 1.5 seconds
4th block