5-3. Software rewrite mode
When the power supply is turned ON with
ware rewrite mode.
Never cut off the power supply or pull out the USB during this process. Neglect may result in main
unit failure.
switch pressed, the system will start up in IT-20 application soft-
Load the software and press the
"PGWr" is displayed to start software rewrite.
Rewrite cannot be executed if several pro-
grams are written in USB.
3
Rewrite progress (%) is indicated while data is loaded,
and "PoFF" is displayed when it is completed. Turn
OFF the power supply and restart the sewing machine.
– 17 –
switch
while
3