Table of Contents
Advertisement
5-2. Setup mode
(1) Setup mode screen
When the power supply is turned on with
In setup mode, the setting item
is selected by using
switches and confirmed by
using the
switch. When
confirmed, the corresponding
setup screen will be displayed.
After the completion of the set-
ting procedure, turn the power
OFF and re-turn it ON.
Setup screen
■
Press the
switch.
* If this screen appears, turn the power
Off and re-turn it ON.
switch pressed, the system starts up in setup mode.
and
MAC address check screen
■
MAC address assigned for each
system can be checked. → See
"5-2. (2) MAC address check screen."
Press the
switch.
■ Memory switch setup screen
press
the
switch.
The memory switch No. is set up.
"5-2. (3) Memory switch
→ See
setup screen."
Press the
switch.
■ Clock setup screen
The clock is set up. → See
(4) Clock setup screen."
Press the
switch.
■ Initialization screen
Press the
switch.
Panel data initialization is execut-
ed. → See
screen."
Press the
Press the
switch.
■
The medium connected to USB is
formatted. → See
format screen."
Press the
Press the
switch.
■ Ip address check screen
Press
the
switch.
"5-2.
The procedure to obtain the IP
address is selected. → See
(7) Ip address setup screen."
Press the
■
The panel version is checked. →
See
– 8 –
"5-2. (5) Initialization
Press the
switch.
switch.
USB format screen
"5-2. (6) USB
Press the
switch.
switch.
"5-2.
Press the
switch.
switch.
Version check screen
"5-2. (8) Version check screen.
Press
the
switch.
"
Advertisement
Table of Contents
