JUKI IT-20 Instruction Manual page 13

■ Memory Switch data List
No.
Network offline setting
U01
Network connection validity/invalidity is selected.
OFF : Network connection is enabled.
ON : Network connection is prohibited.
Clock correction function
U02
Clock correction validity/invalidity when there is network connection is set up.
OFF : Clock correction is not enabled.
ON : The panel clock is corrected in reference to the host PC clock when there is net-
work connection.
Indication period for clock indication screen
U03
This item is valid only when the U10 setting is ON.
In how many seconds after displaying the entire ID the clock display screen should be
displayed is set up (unit: seconds).
Buzzer sound ban setting
U05
The buzzer sound from the panel is banned.
OFF: Buzzer is not banned (buzzer sounds).
ON: Buzzer is banned.
Network communication ban for ISS measurement data ON/Off
U08
Transmission of ISS measurement data from the network to the PC is banned.
OFF : Data is transmitted to PC via network.
ON : Data is not transmitted to PC via network.
Selection of sewing machine rotation signal logic
U09
Follow the setup manual and set up.
Selection of clock screen indication method
U10
Whether the clock display screen is displayed or not after ID indication is selected.
OFF: Clock display screen is not automatically displayed. The clock screen is dis-
played by the scroll switch.
ON : The clock screen is automatically displayed after the set period in U03 after ID
indication.
Indication Id on clock screen
U11
This item is valid only when U10 is set to OFF.
The type of ID indicated by lighting up the LED on the clock display screen is selected.
0 : Product number
1 : Operator ID
2 : Optional ID
3 : Transmission data
U12 Number of stitches neglected by manual switch
The production count-up input is accepted only when the sewing machine is stopped af-
ter thread trimming and the number of sewn stitches exceeds the preset number.
This setting is used for preventing incorrect input or fraudulent input.
Setting range: 0 – 99 (stitches)
U13 Remaining buffer for ISS measurement warning
Warning (E205) is generated when the ISS measurement data capacity stored in the
panel becomes small.
0 : No warning is generated.
1 : A warning is generated when the data capacity to output to the network is becom-
ing small (if this warning is generated even when the system is connected to the
network, there may be a problem in network connection).
2 : A warning is generated when the data capacity to output to USB is becoming small.
Insert a USB memory in the panel and output data if this warning is generated.
U14 Scroll speed
The scroll speed for displaying IDs larger than 4 digits is set up.
Unit : 0.1 seconds, setting range: 5 (0.5 seconds) to 50 (5.0 seconds)
description
– 11 –
Initial value
OFF
ON
3
OFF
OFF
0
ON
0
0
1
15