Introduction; Connecting The Count Manual Switch; Usb Port - JUKI IT-20 Instruction Manual

1. INTROdUCTION

This Instruction Manual covers the panel indication for measuring production support data using IT-20.
Be careful of handling this product so as not to pour water or oil, shock by dropping, and the like
since this product is a precision instrument.

2. CONNECTING THE COUNT MANUAL SwITCH

A
2

3. USB pORT

1 Precautions to be taken when handling USB devices
• Do not leave the USB device or USB cable connected to the USB port while the sewing machine is in opera-
tion. The machine vibration can damage the port section resulting in loss of data stored on the USB device or
breakage of the USB device or sewing machine.
• Do not insert/remove a USB device during reading/writing a program or sewing data.
It may cause data breakage or malfunction.
• When the storage space of a USB device is partitioned, only one partition is accessible.
• Some type of the USB device may not be properly recognized by this sewing machine.
• JUKI does not compensate for loss of data stored on the USB device caused by using it with this sewing machine.
2 USB specifications
• Conform to USB 1.1 standard
• Format supported _____FAT 32
• Consumption current ___The rated consumption current of the applicable USB devices is 500 mA at the maximum.
1) Press in the direction of arrow mark the click of
3
2) Connect optional junction cable connector to
Note) prepare the switch main unit by the
1
+ 5V
Sw
GNd
– 1 –
section A of cord outlet cover 2 assembled in
the rear of operation panel 1 and remove the
cover.
connector CN105 3 of the count manual switch.
customers or ask JUKI business office
about it.
Optional relay cable A (asm.)
JUKI part No. 40008168
3 2 1
CN105
1
2
3