Connecting Two Speakers (Unbridged Connection) - Radio Shack 85 Owner's Manual

12-1977.fm Page 16 Tuesday, July 13, 1999 10:07 AM

Connecting Two Speakers (Unbridged Connection)

If you are connecting only two speakers, you can connect them to the amplifier's
front ( and ) or rear (
CH1 CH2
Caution: This is an unbridged connection that produces 85 watts per channel. If
you do not have high power speakers, use this connection.
1. Connect one end of a speaker wire's marked conductor to the amplifier's
(front-left positive) or
CH1
2. Connect the unmarked conductor's end to the amplifier's
negative) or
CH3
3. Repeat Steps 1 and 2 to connect speaker wires to the amplifier's
(front-right) or
CH2
4. Connect the other ends of the speaker wires so
the left speaker and
16
and ) speaker terminals.
CH3 CH4
+
(rear-left positive) terminal.
CH3
(rear-left negative) terminal.
+
and (rear-right) terminals.
CH4 CH4
(or ) connects to the right speaker.
CH2 CH4
(front-left
CH1
+
and
CH2
(or connects to
CH1 CH3)
+