Connecting Four Speakers; Connecting Two Speakers (Unbridged Connection) - Radio Shack XL-400 Owner's Manual

12-2018.fm Page 13 Friday, May 12, 2000 12:46 PM

Connecting Four Speakers

1. Use a screwdriver to connect the front
left speaker's positive (+) wire to the
amplifier's terminal.
CH1 (+)
2. Use a screwdriver to connect the front
left speaker's negative (–) wire to the
amplifier's terminal.
CH1 (–)
3. Repeat Steps 1–2 to connect the front
right speaker's positive (+) and negative

Connecting Two Speakers (Unbridged Connection)

This connection produces 100 watts per
channel. Use this connection if you do not
have high-power speakers.
1. Use a screwdriver to connect the left
speaker's positive (+) wire to the ampli-
fier's terminal.
CH3 (+)
CH2 Front
CH1 Front
Left Speaker Right Speaker
Left Speaker
Connecting Inputs
CH3 Rear CH4 Rear
Left Speaker
Right Speaker
(–) wires to the amplifier's
terminals.
CH2 (–)
4. Repeat Steps 1–3 to connect the rear
left and rear right speaker's positive (+)
and negative (–) wires to the amplifier's
, ,
CH3 (+) CH3 (–) CH4 (+)
minals.
Right Speaker
2. Use a screwdriver to connect the left
speaker's negative (–) wire to the ampli-
fier's terminal.
CH3 (–)
3. Repeat Steps 1–2 to connect the right
speaker's positive (+) and negative (–)
wires to the amplifier's
terminals.
(–)
and
CH2 (+)
, and ter-
CH4 (–)
and
CH4 (+) CH4
13