Toyota 4A-FE Repair Manual page 137

4A-FE (Ex. Australia) CORRECT
_
~-RingW
. .
.aJ
lnject!f Oelivery Pipe
Grommet
~
--~
F l , - ,
..Ii.JD
CJ '
WRONG
~
4A-FE
Spacer
EFI SYSTEM - Fuel System Fl-117
(c)
While turning the injector left and right, install it to
the delivery pipe. Install the four injectors.
(d) (4A-FE)
Place the four insulators and two spacers in position
on the cylinder head.
(4A-GE)
Place the four insulators and three spacers in position
on the cylinder head.
(e) Place the injectors together with the delivery pipe in
position on the cylinder head.
(f) Check that the injectors rotate smoothly.
HINT: If injectors do not rotate smoothly, the probable
cause is incorrect installation of 0-rings. Replace the 0-
ring.
(g) Position the injector connector upward.