Toyota 4A-FE Repair Manual page 195

LU-8 LUBRICATION SYSTEM - Replacement of Engine Oil and Oil Filter
SST
(d} Lightly screw in the filter to where you feel resis-
tance.
(e) Then, using SST, tighten the oil filter an extra 3/4
turn.
SST 09228-06500
3. REFILL WITH ENGINE OIL
(a) Clean and install the oil drain plug with a new gasket.
Torque the drain plug .
.__ _ _ _ _ _ _ _ _ _ _ _ _ _ L_u04----'--'9o
Torque: 350 kg-cm (25 ft-lb, 34 N·m}
LU0488
(b} Fill the engine with new oil, API grade SD, SE, SF, SG
or better.
Capacity:
4A-FE
{c)
Drain and refill
Without oil filter change
3.0 liters (3.1 US qts, 2.6 lmp.qts)
With oil filter change
3.2 liters (3.3 US qts, 2.8 lmp.qts)
Dry fill {w/ Oil cooler)
4.1 liters (4.3 US qts, 3.6 lmp.qts}
Dry fill (w/o Oil cooler)
3.7 liters (3.9 US qts, 3.3 lmp.qts)
Reinstall the oil filler cap with the gasket.
4. START ENGINE AND CHECK FOR LEAKS
5. RECHECK ENGINE OIL LEVEL (See page LU-61