Toyota 4A-FE Repair Manual page 128

Fl-108
EFI SYSTEM - Fuel System
INSTALLATION OF COLD START INJECTOR
1. INSTALL COLD START INJECTOR
Install a new gasket and the injector with the two bolts .
Torque: 4A-FE 95 kg-cm (82 in.-lb, 9.3 N·m)
2.
INSTALL COLD START INJECTOR PIPE
Install the injector pipe with four new gaskets and the two
union bolts.
Torque: 4A-FE 180 kg-cm (13 ft-lb, 18 N·m)
3. CONNECT COLD START INJECTOR CONNECTOR
4. CONNECT CABLE TO NEGATIVE TERMINAL OF
BATTERY
5. CHECK FOR FUEL LEAKAGE (See page Fl-12)