Noise Emission; Contents Of Delivery; Transport And Start Up; Transport And Installation - Jet JDP-840VADT Operating Instructions Manual

4.2 Noise emission

(Inspection tolerance 4 dB)
Acoustic pressure level
(according to EN ISO 11202):
Idling LpA 69,6 dB(A)
In operation LpA 79,0 dB(A)
The specified values are emission
levels and are not necessarily to be
seen as safe operating levels.
As workplace conditions vary, this
information is intended to allow the
user to make a better estimation of the
hazards and risks involved only.
4.3 Content of delivery
16mm keyless chuck, B18
MT-4 / B18 arbour
Chuck guard
Table rising crank (2x)
Coolant facility
Drift key
Operating tools
Assembly kit
Operating manual
Spare parts list.
4.4 Description of the machine
Fig 1
A......Motor
B.....Electric Box
C....High / Low speed select switch
D....Scale ring lock knob
E....Down feed handle lock
F....Down feed handles
G....Coolant nozzle
H....Rack
I......Coolant pump
J.....Base with coolant tank
K....Table lifting handwheel
L.....Table locking handle
M....Working table
N....Drill chuck
O....Chuck guard
P....Micro feeding handwheel
Q....Drill / Tap depth stop
Fig 2
R....Spindle OFF-button
S....Drill / Tap select switch
T....Spindle reverse jog-button
U....Digital readout
V....Variable speed select knob
W...Coolant On/Off switch
X....Spindle ON-button
Y....Emergency stop button
Fig 3
Z...Feed select switch

5. Transport and start up

5.1 Transport and installation

The machine will be delivered in a
closed crate.
For transport use a forklift or hand
trolley. Make sure the machine does
not tip or fall off during transport.
Danger of tipping due to high gravity
center!
The machine is designed to operate in
closed rooms.and must be placed
stable on a firm and levelled ground.
A minimum distance of 800mm
towards a rear wall must be kept (for
access to the electrical box).
The machine must be bolted down.
For packing reasons the machine is
not completely assembled.

5.2 Assembly

If you notice transport damage while
unpacking, notify your supplier
immediately. Do not operate the
machine!
Dispose of the packing in an
environmentally friendly manner.
Clean all rust protected surfaces with
a mild solvent e.g. petroleum.
(Note: lacquer thinner or similar can
destroy the paint).
Attach the table lifting handwheel (K)
and the table locking handle (L).
Mounting machine to the floor:
Unbolt the machine from the shipping
crate.
Use heavy duty fibre belts (AA, Fig 4)
for lifting the machine off the pallet.