Siemens SIMATIC ET 200SP Manual page 49

Diagnostics display LED
RUN LED
ERROR LED
Monitoring of the supply voltage (PWR-LED)
Channel status display
For channel diagnostics
For module diagnostics
Electrical isolation
Electrical isolation channels
Between channels
Between channels and backplane bus
Between the channels and the voltage supply of
the electronics
Isolation
Isolation test voltage
Standards, approvals, certificates
Maximum achievable safety class in safety mode
Performance Level according to ISO 13849-1
Category according to ISO 13849-1
SIL according to IEC 61508
Probability of failure (with a mission time of 20
years and time to repair of 100 hours)
•
•
Environmental conditions
Ambient temperature in operation
Horizontal installation, min.
Horizontal installation, max.
Vertical installation, min.
Vertical installation, max.
Dimensions
Width
Weights
Weight, approx.
Dimension drawing
See ET 200SP BaseUnits
(http://support.automation.siemens.com/WW/view/en/58532597/133300) manual
Digital output module F-DQ 8x24VDC/0.5A PP HF (6ES7136-6DC00-0CA0)
Manual, 05/2017, A5E38578424-AA
Low demand mode: PFDavg according to SIL3 < 6.00E-05
High demand/continuous mode: PFH accord-
ing to SIL3
Technical specifications
6ES7136-6DC00-0CA0
Yes; green LED
Yes; red LED
Yes; green PWR LED
Yes; green LED
Yes; red LED
Yes; green/red DIAG LED
No
Yes
No
707 V DC (type test)
PLe
Cat. 4
SIL 3
< 2.00E-09 1/h
0 °C
60 °C
0 °C
50 °C
15 mm
48 g
49