Sony Ericsson P900 User Manual page 49

Incoming calls can be received on both lines at any time. The
name of the line is shown and the ringtone defined for the line is
used.
To select a line for outgoing calls
The preset line is shown by the icon on the status bar. If you
want to use the other line:
• With the Flip closed, press
depending on the previously preset line.
Switch to line 2
• With the Flip open, tap
2
depending on the previously preset line.
to line 2
Corporate phone services in P900
The P900 can be used as a corporate phone in an Ericsson
® ®
MD110 or Business Phone PBX, if this is equipped for
mobile extensions.
To place calls to colleagues, use the internal extension numbers.
When dialing an external number, you do not need to dial the
external line prefix; it is added automatically. Dial the
switchboard operator or corporate voicemail as from any other
corporate phone.
It is recommended that when storing numbers in Contacts you
use the international number format, starting with
allows you to use the Contact card when you do not use the
PBX, when you are abroad, and when you are sending SMS or
MMS messages.
Phone
and select
Switch to line 1
and select or
Switch to line 1 Switch
. This also
+
If you know what numbers and codes your PBX accepts, you
can send these without the phone manipulating them. Start any
number or command with a
holding the
Contact card, it should be stored with a leading
command (to the PBX or for example to a phone bank) with a
leading .
pc
or
When using it at home, the call is still dialed as an internal call
via the PBX.
Note When traveling abroad, use your phone as a normal GSM
phone, by clicking the PBX status bar icon and set the calling
card to Off.
. This is done by pressing and
p
key. When storing such a number on a
, and a
p
49