Wap Accounts - Sony Ericsson P900 User Manual

Area Information is a type of text message that is sent to all
subscribers in a certain network area, for example a local traffic
report.
To enable Cell Information
Select the checkbox
Cell information
To turn Area Information on
1. Check the checkbox. Received messages will
Area information
automatically be stored, and displayed in the list when
dismissed.
2. The list shows all the channels that you have defined on your
P900. The checkbox for each channel shows if it is on
(checked, ready to receive messages) or off (cleared, not
active):
To add a new channel
1. Select .
New
2. Enter the number of the new channel in the New Channel
dialog. Channel numbers can be from 0 to 999. If there are
too many channels defined,
see a message:
Maximum channels on SIM
Channel numbering is operator-dependent. Please consult
your network operator for information.
To turn a channel on or off
Select the channel in the list and check the checkbox. To turn it
off, clear the checkbox.
156
will be disabled and you will
New
.
To delete a channel
Select . Since deleting a channel cannot be undone, you
Delete
will be asked to confirm the deletion. Deleting the channel will
also delete any stored Area Information messages for that
channel in your Area Info Inbox.

WAP accounts

Use these settings to set up and manage WAP accounts on your
P900.
WAP accounts are intended for multimedia messages and for
accessing the Internet through a WAP gateway. (Such gateways
make use of proxy port 9200-9203.) All other proxy settings
should be included in your Internet accounts.
For security reasons, some WAP pages and services, for
example online banking, can only be accessed from a particular
WAP account.
The dialog has two tabs:
Basic
Basic tab
The dialog displays a list of all the WAP accounts on your P900.
You can add a account to the list and
New
existing account.
and
Preferred.
or an
Edit Delete
Control panel