Sony Ericsson P900 User Manual page 130

– All enabled devices that are visible to others within range
are shown with their name and icon. You can use
restrict the list to one category (only PCs, for example).
– Paired devices within range are shown in regular text.
– Nonpaired devices within range are shown with their
names in italics.
– Devices that are within range but unknown are shown with
a preset name.
4. Select the device you want your P900 to pair with, and enter
a passcode when requested. When the passcode is accepted,
the pairing process is complete; see 'Passcodes' on
page 131.
5. If, in the future, you want to allow a paired device to connect
to your P900 without your explicit approval of each
connection, you should select
then select a device and the checkbox
Bluetooth > Devices,
Allow to connect without confirmation
To make another device initiate pairing with your P900
1. In
Control panel > Connections > Bluetooth > Settings
to .
Operation mode On
2. Follow the other device's manual to initiate pairing.
3. When asked for a passcode, enter the same on both devices.
130
to
Show:
Control panel > Connections >
.
, set
4. If, in the future, you want to allow a paired device to connect
to your P900 without your explicit approval of each
connection, you should select
select a device and the checkbox
Bluetooth > Devices,
.
connect without confirmation
Tip You can change the name of a paired device. When you pair
with other Bluetooth wireless technology-enabled phones, it is
very useful to include the user's name as part of the device
name. This will make it very easy to beam information to the
desired recipient.
To make a headphone initiate pairing with your P900
1. Check that the device you want to pair with your P900:
– Is switched on and within range.
– Has its Bluetooth functionality activated and is in visible
mode.
2. In
Control panel > Connections > Bluetooth > Settings
to .
Operation mode On
3. Follow the headphone's manual to initiate pairing on the
headphone.
4. In the tab, tap . Your P900 searches for all devices
Devices Add
within range and lists them.
5. When asked for a passcode, enter the headphone's passcode
on your P900.
Control panel > Connections >
Allow to
, set
Connecting to other devices