HP EPM-441A User Manual page 49

Making Measurements with the HP E-Series Power Sensors
Example
To make a measurement using an HP E-series power sensor. The
frequency of the signal to be measured is 100 MHz.
• Disconnect the power sensor from any source.
Zero
• Press .
Cal
• Press .
Zero
• Connect the power sensor to the POWER REF output.
• Press .
Cal
Frequency
• Press
Cal Fac
hardkeys to enter 100. Press
• Connect the power sensor to the signal to be measured.
• The measurement result is now displayed.
HP EPM-441A User's Guide
, Freq . Use the ,
.
MHz
Power Meter Operation
, and
2-9