Axminster HBS200N Manual page 12

Illustration and Parts Description
A
B
A
B
Lower blade guide assembly (A) Upper blade guide assembly (A)
Blade guide pin and clamping grub screw (B) Rear thrust bearing and clamping grub screw (B)
B A
A
Lower blade guide guard (A) Upper guide assembly fore and aft
Rear thrust bearing and clamping grub screw (B) clamping grub screw (A)
Decrease tension
A B
Increase tension
Twist the locking lever clockwise to adjust the clamping
Blade tensioning spring (A), Blade tensioning spring (B)
tension, (Two rotations should be adequate) then press
under tension with no tension applied
down the lever to lock the fence in position.
12