5.3
Installing on the S7-300 standard rail
Follow the steps below to install the SCALANCE W7x8 on a vertical S7-300 rail:
1. Place the device on the upper edge of the S7-300 standard rail (position A).
2. Screw the device to the rail using the supplied screw (position B).
Figure 5-2
SCALANCE W788-x / W748-1
Operating Instructions, 06/2016, A5E03678333-10
Installing on an S7-300 standard rail
5.3 Installing on the S7-300 standard rail
Mounting
23