Configuring Traffic Storm Control
Traffic Storm Control Example Configuration
Traffic Storm Control Example Configuration
This example shows how to configure traffic storm control:
switch# configure terminal
switch(config)# interface ethernet 1/4
switch(config-if)# storm-control action trap
switch(config-if)# storm-control broadcast level 40
switch(config-if)# storm-control multicast level 40
switch(config-if)# storm-control unicast level 40
This example shows how to specify the number of Storm Control traps per minute:
switch# configure terminal
switch(config)# snmp-server enable traps storm-control trap-rate 100
switch(config)#
Cisco Nexus 3000 Series NX-OS Layer 2 Switching Configuration Guide, Release 6.x
148
OL-29545-03