Configuring The Rapid Pvst+ Hello Time For A Vlan - Cisco Nexus 3000 Series Configuration Manual

Configuring the Rapid PVST+ Hello Time for a VLAN

Be careful when using this configuration. For most situations, we recommend that you configure the
Note
primary root and secondary root to modify the bridge priority.
Procedure
Step 1
Step 2
This example shows how to configure the bridge priority of a VLAN:
switch# configure terminal
switch(config)# spanning-tree vlan 5 priority 8192
Configuring the Rapid PVST+ Hello Time for a VLAN
You can configure the Rapid PVST+ hello time for a VLAN.
Be careful when using this configuration. For most situations, we recommend that you configure the
Note
primary root and secondary root to modify the hello time.
Procedure
Step 1
Step 2
This example shows how to configure the hello time for a VLAN:
switch# configure terminal
switch(config)# spanning-tree vlan 5 hello-time 7
Cisco Nexus 3000 Series NX-OS Layer 2 Switching Configuration Guide, Release 6.x
74
Command or Action
switch# configure terminal
switch(config)# spanning-tree vlan
vlan-range priority value
Command or Action
switch# configure terminal
switch(config)# spanning-tree vlan
vlan-range hello-time hello-time
Purpose
Enters global configuration mode.
Configures the bridge priority of a VLAN. Valid values
are 0, 4096, 8192, 12288, 16384, 20480, 24576, 28672,
32768, 36864, 40960, 45056, 49152, 53248, 57344, and
61440. All other values are rejected. The default value is
32768.
Purpose
Enters global configuration mode.
Configures the hello time of a VLAN. The hello
time value can be from 1 to 10 seconds. The
default is 2 seconds.
Configuring Rapid PVST+
OL-29545-03