Traffic Storm Control Example Configuration - Cisco nexus 5000 series Configuration Manual

Configuring Traffic Storm Control
Note When a storm event occurs on a port and the packets are dropped due to storm control configuration, a
syslog message is generated to indicate that the storm event has started. An additional syslog message is
generated when the storm event ends and the packet are no longer dropped.

Traffic Storm Control Example Configuration

This example shows how to configure traffic storm control:
Default Settings for Traffic Storm Control
The following table lists the default settings for traffic storm control parameters.
Table 18: Default Traffic Storm Control Parameters
Parameters
Traffic storm control
Threshold percentage
OL-25842-01
Cisco Nexus 5000 Series NX-OS Layer 2 Switching Configuration Guide, Release 5.1(3)N1(1)
Traffic Storm Control Example Configuration
Default
Disabled
100
267