Configuring a Layer 2 Interface as a Private VLAN Isolated Trunk Port
Step 7
Cisco Nexus 3000 Series NX-OS Layer 2 Switching Configuration Guide, Release 6.x
30
Command or Action
Enter one of the following commands
Configuring Private VLANs
Purpose
Ensure that the native VLAN is part of the
Note
allowed VLAN list. The default for this
command is to allow no VLANs on this
interface, so you must configure the native
VLAN as an allowed VLAN, unless it is
already added as an associated VLAN, to
pass native VLAN traffic.
Do not configure primary VLAN as part
Note
of allowed VLAN list.
OL-29545-03