Verifying Traffic Storm Control Configuration; Monitoring Traffic Storm Control Counters; Configuration Examples For Traffic Storm Control - Cisco Nexus 9000 Series Configuration Manual

Verifying Traffic Storm Control Configuration

Command or Action
Step 5 [no] storm-control-cpu arp rate
Example:
switch(config-if)# storm-control-cpu arp rate
Step 6 exit
Example:
switch(config-if)# exit
switch(config)#
Step 7 (Optional) show running-config interface {ethernet
slot/port | port-channel number}
Example:
switch(config)# show running-config interface
ethernet 1/1
Step 8
(Optional) copy running-config startup-config
Example:
switch(config)# copy running-config startup-config
Verifying Traffic Storm Control Configuration
To display traffic storm control configuration information, perform one of the following tasks:
Command
show running-config interface
show access-list storm-control arp-stats interface
[ethernet | port-channel] number

Monitoring Traffic Storm Control Counters

You can monitor the counters the Cisco NX-OS device maintains for traffic storm control activity.
Command
show interface [ethernet slot/port | port-channel number] counters
storm-control

Configuration Examples for Traffic Storm Control

The following example shows how to configure traffic storm control:
Cisco Nexus 9000 Series NX-OS Security Configuration Guide, Release 9.x
436
Purpose
Configures traffic storm control rate for arp packets entering
a port channel. This rate is divided equally among the
members of the port channel.
Exits interface configuration mode.
Displays the traffic storm control configuration.
Copies the running configuration to the startup
configuration.
Purpose
Displays the traffic storm control configuration.
Displays the storm control statistics for arp packets
on the interface.
Purpose
Displays the traffic storm control
counters.
Configuring Traffic Storm Control