Configuring System Date/Time; Configuring Idrac - Dell USC User Manual

Configuring System Date/Time

To set the date and time for the system:
1 From the USC/USC-LCE Home page, select Hardware Configuration.
2 In the right pane, select Configuration Wizards.
3 Click System Date/Time Configuration.
The default system date and system time shown in USC-LCE is the date
and time reported by the system BIOS.
4 Modify the System Date and Time (HH:MM:SS AM/PM), as required.
5 Click Finish to apply the changes.
6 To return to the Configuration Wizards, click Back or click Cancel to exit.

Configuring iDRAC

To configure iDRAC parameters applicable to the system, such as LAN,
common IP settings, IPv4, IPv6, Virtual Media, and LAN user configuration
use the iDRAC Configuration Wizard.
To configure and manage iDRAC parameters:
1 In the left pane of Home page, click Hardware Configuration.
2 In the right pane, click Configuration Wizards.
3 Click iDRAC Configuration, and configure the following parameters.
• LAN Configuration
• Advanced LAN Configuration
• Common IP Configuration
• IPv4 Configuration
• IPv6 Configuration
• Virtual Media Configuration
• LAN User Configuration
• Summary and Confirmation
58
USC and USC-LCE Operations