What's New In Usc/Usc-Lce 1.5; Upgrading To Usc Or Usc-Lce - Dell USC User Manual

What's new in USC/USC-LCE 1.5

The new features are:
• Backup and Export server profile
• Import server profile
• View and export factory shipped inventory
• Configure and upgrade firmware for Converged Network Adapters (CNA)
cards. Supported on the following CNA card:
Broadcom:
– M710HD Dual Port 10Gig 57712 NDC
• Software RAID configuration
• Enhancement to the RAID configuration feature — Virtual disk slicing
support
• Driver packs support for new operating systems
see USC/USC-LCE – Supported Dell Systems and Operating Systems
section in the Dell Systems Software Support Matrix available at
support.dell.com/manuals.
1. Indicates the newly introduced feature for USC.

Upgrading to USC or USC-LCE

Depending on the system, you can upgrade from a Baseboard Management
Controller (BMC) to an Integrated Dell Remote Access Controller 6
(iDRAC6) Express or an iDRAC6 Enterprise card; this hardware upgrades the
USC to USC-LCE. See
NOTE:
You can upgrade Dell systems series y21x-y51x to USC-LCE. See the
Hardware Owner's Manual for more information.
16
Introduction
1
Updating Platform
1
. For more information,
for more information.