D-Link DXS-1210-10TS User Manual page 47

Unit: Select the switch unit that will be used for this configuration.
Click the VLAN Detail button to view more detailed information about the VLAN on the specific interface.
Click the Edit button to re-configure the specific entry.
After clicking the VLAN Detail button, the following page will appear:
After clicking the Edit button, the following window will appear. This is a dynamic window that will change
when a different VLAN Mode is selected. When Access was selected as the VLAN Mode, the following
page will appear.
Port: Display the VLAN port number.
VLAN Mode: Select the VLAN mode option. Options to choose from are Access, Hybrid, and Trunk.
Acceptable Frame Type: Select the acceptable frame type behavior option. Options to choose from are
Tagged Only, Untagged Only, and Admit All.
Figure 4.65 – L2 Features > VLAN Interface
Figure 4.66 – L2 Features > VLAN Interface – VLAN Detail
Figure 4.67 – L2 Features > VLAN Interface – VLAN Detail
41
D-Link DXS-1210 Series User Manual