Saeco M-50 Operation And Maintenance page 32

English
To get a coarse grind, reposition the collar on position 10.
Reinsert the adjusting collar by pressing downwards the
front part first and the back part after. Make sure you hear
2 clicks.
Reposition the grinding adjustment in the initial position.
Now grinding will be coarser.
Reassemble the coffee bean hopper on the base of the
coffee grinder. Open the closure arm.
9.2.5.2 Recalibration for Fine Grind
The coffee grinder factory
settings are set in order to
get a fine grind. If grinding
at position 0 does not
match the desired result,
recalibrate the grinding to
make it finer.
32
Turn the grinding adjusting collar to position 15.
Raise the recalibration release lever and remove the
adjusting collar.