Turning On/Off The Machine; First Use - Use After A Long Period Of Inactivity; Washing The Parts Coming Into Contact With Food - Saeco M-50 Operation And Maintenance

Place the lid on the bean hopper and open the closure
arm.
This coffee
meant to grind coffee
beans only.
7.2

Turning on/off the Machine

The appliance si turned on and off by means of the control
knob on the right side.
7.3
Upon first use of the machine, perform the following steps:
• Thoroughly rinse the coffee bean hopper and its lid with
• Carefully dry the coffee bean hopper and its lid.
• Refill the machine (follow the instructions above).
• Connect the plug of the appliance to the mains (see
They have to be performed:
• at first start-up;
• when the machine remains inactive for a long time (more
grinder is
7.3.1
Close the arm for coffee bean hopper closure, remove the
coffee bean hopper, empty, wash, rinse and dry it.
Clean the grinders using the brush provided.
Reassemble the coffee bean hopper, fill it with coffee beans
(see section "Filling the Coffee Bean Hopper") and open
the arm for coffee bean hopper closure.
7.4
Rinse all the parts coming into contact with food.
• Thoroughly wash your hands.
• Prepare a chlorine-based, antibacterial disinfecting solution
• Remove the coffee bean hopper from the appliance.
• Remove the lid from the coffee bean hopper. Immerse all
First Use - Use after a Long
Period of Inactivity
water.
section "Connection to the Electric Network").
than 2 weeks).
After a Period of Inactivity
Washing the Parts coming
into Contact with Food
(the products can be purchased at the chemist's) following
the concentrations indicated on the product.
these parts in the previously prepared solution.
English
21