Input/Output Data - Furuno FAR-1513 Installation Manual

4.

INPUT/OUTPUT DATA

Notice for FAR-1518(-BB)/FAR-1528(-BB)
These radars must be interconnected to the following type approved sensors:
EPFS meeting the requirements of the IMO resolution MSC.112(73).
Gyrocompass meeting the requirements of the IMO resolution A.424(XI).
SDME meeting the requirements of the IMO resolution MSC.96(72).
4.1 Processor Unit
Input and output data handled at the processor unit are shown in the table below.
Input
Data
Heading signal
Speed signal
Navaid data
AIS signal
Alarm handling
signal
* Data input cycle must be more than 40 Hz (high speed craft) or 20 Hz (conventional
ships).
Output
Data
Radar system data IEC 61162-1 Ed.4 RSD, OSD
TT data**
Alarm signal
** The output sentence can be set on the [TT DATA OUTPUT] menu (see page 3-9).
Specification
IEC 61162-2*
IEC 61162-1 Ed.4
IEC 61162-1 Ed.4 Position, time and
date, datum, course,
speed, wind, current,
depth, temperature,
Navtex, etc.
IEC 61162-2
Contact closure
IEC 61162-1 Ed.4
Specification
IEC 61162-1 Ed.4 TTD, TTM, TLB
IEC 61162-1 Ed.4
Contact closure
Contents
Input from alarm system
Input from alarm system
Sentence
Four systems, output con-
tents are selected on the
[ALERT I/F] menu.
Remarks
Remarks
4-1