Table of Contents
Advertisement
FURUNO
SPECIFICATIONS OF REMOTE DISPLAY
1
REMOTE DISPLAY
1.1
Display type
1.2
Brilliance
1.3
Data indication
1.4
Remote control
1.5
Remote dimmer
1.6
Interface
Remote control
Sensor
Daisy chain (for RD-20) Output: 1 port, 38,400 bps
1.7
Data sentences
2
REMOTE CONTROLLER (OPTION)
2.1
Control button
2.2
Interface
3
DIMMER CONTROLLER (OPTION)
3.1
Control button
3.2
Interface
4
POWER SUPPLY
4.1
Remote display
5
ENVIRONMENTAL CONDITION
5.1
Ambient temperature
Remote display
Remote/Dimmer controller
5.2
Relative humidity
5.3
Degree of protection
5.4
Vibration
6
UNIT COLOR
RD-20
Segment LED and dot matrix (red)
10 steps (includes 'OFF')
Ship's speed, Course, Heading, Distance, Depth, Rate of turn,
Wind direction/speed, Rudder angle, Engine/ shaft RPM,
Propeller pitch, Water temperature
Remote controller (option) required
Dimmer controller (option) required
Serial, 1 port, 38,400 bps,
5 VDC output (for remote/dimmer controller)
Input: 1 port, NMEA0183 Ver1.5/2.0/3.0/4.0/4.1
DBK, DBS, DBT, DPT, HDG, HDT, HDM, HTC, HTD, MTW, MWV,
RPM, RMC, ROT, RSA, THS, VBW, VHW, VLW, VTG, VWT, VWR
DISP, UNIT, MODE
Serial, Input: 1 port, Output: 1 port, 38,400 bps
5 VDC input (supplied from remote display)
5 VDC output (for dimmer controller)
DAY/NT, BRILL (▲/▼)
Serial, Output: 1 port, 38,400 bps
5 VDC input (supplied from remote display)
12-24 VDC: 0.6-0.3 A (includes controller source)
-25°C to +55°C
-15°C to +55°C
95% at 40°C
IP22
IEC 60945
N2.5
SP - 1
RD-20
E4454S01G
161227
Advertisement
Table of Contents
